VIDEO - DRILLING RIG MI8 FOR MINERAL RESEARCH BY DIAMOND CORE DRILLING
New drilling rig MI8 with pull back of 8.000 kg driven by hydraulical cylinder, speed without comparison.
This rig is equipped with a rotary head with max speed of 1200 rpm. An arm placed at the bottom of the head enables the loading/unloading of the drill pipes. The charging system is controlled by a radio remote control panel that increases the comfort and safety of the operator. A wireline winch is used for the extraction of the samples and these operations are now faster and easier than in the past.
POWER PACK
Engine power 156 Hp (115 kW)
FUEL TANK
Capacity 130 litri (34,3 gal)
MAST:
Pull up 8000 daN (17600 lbf)
ROTARY HEAD
Max speed 1200 Rpm
WINCH
Wire-line: tiro diretto max 600 daN (1350 lbf) 302 m (991 ft) di fune 107 m/min (351 ft/min)
DOUBLE HYDRAULIC CLAMP
model MS300: max passagge Ø 305 mm (12)
This rig is equipped with a rotary head with max speed of 1200 rpm. An arm placed at the bottom of the head enables the loading/unloading of the drill pipes. The charging system is controlled by a radio remote control panel that increases the comfort and safety of the operator. A wireline winch is used for the extraction of the samples and these operations are now faster and easier than in the past.
POWER PACK
Engine power 156 Hp (115 kW)
FUEL TANK
Capacity 130 litri (34,3 gal)
MAST:
Pull up 8000 daN (17600 lbf)
ROTARY HEAD
Max speed 1200 Rpm
WINCH
Wire-line: tiro diretto max 600 daN (1350 lbf) 302 m (991 ft) di fune 107 m/min (351 ft/min)
DOUBLE HYDRAULIC CLAMP
model MS300: max passagge Ø 305 mm (12)
